Your Subtitle text


At Orange Coast Rebuilding, Inc., our Machine Tool Services are extensive, and our workmanship second to none. Whether your equipment needs Rebuilding, Retrofitting, Remanufacturing, or Rescraping and Alignment, our staff of highly trained, experienced professionals will complete your project on time and on budget.
Following is a partial list of the Machine Tool Equipment we service:
  • Lathes
  • Horizontal Boring Mills
  • Grinders
  • Jig Borers
  • Machining Centers
  • CNC Retrofitting
  • Vertical Boring Mills

In addition, we also provide the following On-Site Services:
  • CNC Control Services
  • Used Machinery Inspections
  • Laser Calibrations
  • Machine Leveling & Alignment
  • Electrical Repair Service
  • Scrape & Align Gibs, Slides & Ways
  • New Turcite applied and scraped in
  • Machinery Relocations & Installations
  • Repair & Service All Machine Tool Brands
  • Troubleshooting, Evaluations and Recommendations
All services include Documentation, Delivery, Installation, and a full One year Warranty.

12 Reasons Why You Get More With Orange Coast

1.  DISASSEMBLY: Upon arrival at our plant, your machine is completely disassembled to bare castings.
2.  CLEANING: All castings are thoroughly cleaned and sanded to remove old paint. Castings are then filled and primed with a protective paint.
3.  REPLACEMENT PARTS: All parts which affect the operating integrity of the machine are carefully examined to determine whether to rebuild or replace them.
4.  BEARINGS, BUSHINGS & SEALS: To insure original accuracy's and long productive machine life, all bearings, bushings, seals, etc. are replaced.
5.  HYDRAULICS: Hydraulic systems will be completely disassembled and cleaned. All worn valves, spools, cylinders and pumps will be rebuilt or replaced. All filters, packings and seals will be replaced.
6.  SPINDLES: All spindles are completely disassembled, reground, lapped or machined accordingly to bring them back to original tolerances. New bearings and seals are fit to the assembly.
7.  SCREWS, NUTS & SHAFTS: All positioning, feed and motion screws and shafts are checked for wear and rebuilt or replaced.
8.  LUBRICATION: The lubrication system will be thoroughly cleaned and checked. All defective gauges, meters and oilers will be replaced.
9.  ELECTRICAL CABINETS: All relays, magnetics, motor starters and controls are rebuilt. All push buttons, switches, conduits, fittings and wiring are checked and replaced as required. All electric motors are rebuilt.
10.  WAY SURFACES: All hardened and ground ways are reground flat and parallel. All scraped surfaces are plugged to repair scratches, hand scraped and fit to restore original machine geometry.
11.  PAINTING: Machine casting surfaces will be filled and sanded. Machine will then be painted with the customer's desired color and paint preference.
12.  INSPECTION: Upon final assembly of machine, all functions are tested by Orange Coast technicians. Final accuracy and alignments are checked to see that they either meet or exceed original manufacturer's specifications.
Website Builder